I recently replaced the JLF in one of my HRAPs, and I'm trying to take the actual stick assembly off the mounting plate for later use. Two screws came out fine.
I stripped the heads on the screws of the other two, and that's when I realized that blasted red glue was used to hold the bolts and screws in place.
I attempted to drill out the screws so that I can use an extractor and it just won't grip. Is there anything I can do to get these screws out?
I stripped the heads on the screws of the other two, and that's when I realized that blasted red glue was used to hold the bolts and screws in place.
I attempted to drill out the screws so that I can use an extractor and it just won't grip. Is there anything I can do to get these screws out?