I'm somewhat new here, only created an account recently. If I make any mistakes, or if this is in the wrong place, please let me know!
I've had a goal in mind that I'm finally working on: getting a ps2 fight stick. So far, I've purchased a shell so to speak, a Hori PS1 fightstick that seems in decent shape, except the board (motherboard?) seems to be broken. I got it so I could use it as a shell, so it's all good, plus it was dirt cheap. Here are the pictures.
http://imgur.com/a/KlA8n
Basically, since I'll need to replace the internals, I was wondering what I would need. I think I could use an arcade encoder like this one...
http://www.ebay.ca/itm/No-Delay-Arcade-USB-Encoder-To-PC-PS2-PS3-Joystick-For-MAME-5Pin-Sanwa-Buttons-/190996747947?pt=US_Video_Game_Controllers&hash=item2c784b16ab&_uhb=1
But I'm not sure how I would integrate the turbo switches, if that's even possible. Obviously, I'm going to replace the joystick and buttons, but first I thought I should start with this. Please let me know what you think!
I've had a goal in mind that I'm finally working on: getting a ps2 fight stick. So far, I've purchased a shell so to speak, a Hori PS1 fightstick that seems in decent shape, except the board (motherboard?) seems to be broken. I got it so I could use it as a shell, so it's all good, plus it was dirt cheap. Here are the pictures.
http://imgur.com/a/KlA8n
Basically, since I'll need to replace the internals, I was wondering what I would need. I think I could use an arcade encoder like this one...
http://www.ebay.ca/itm/No-Delay-Arcade-USB-Encoder-To-PC-PS2-PS3-Joystick-For-MAME-5Pin-Sanwa-Buttons-/190996747947?pt=US_Video_Game_Controllers&hash=item2c784b16ab&_uhb=1
But I'm not sure how I would integrate the turbo switches, if that's even possible. Obviously, I'm going to replace the joystick and buttons, but first I thought I should start with this. Please let me know what you think!