I've got three different problems I want to fix here:
1. I have a Qanba Q2 (PS3 Version) which suddenly doesn't work. When I plug in the USB, the lights faintly flicker (so faint, you can't see the original blue colour, but can tell it turned on), turn off completely and then nothing happens. The stick also doesn't respond to any button presses and when plugged into the PC, the stick isn't shown on the control panel (not even as unknown device). So I attempt to replace the USB cable by exchanging it with the Q4 I have...and still the same problem. I take out my multimeter to see if there's power on the stick. Sure enough there's power. I try unplugging all the LEDs and still nothing. Anyone know what's wrong?
2. A friend's TE Round 1 automatically presses down when I plug it into the PS3. So I open it up and disconnect the JLF. Still occurs. I take a test meter and check the voltage between the VCC and Down and sure enough the voltage is lower than on the other directions. How do I fix this? I heard it has to do with a resistor being installed. I recall seeing it somewhere on Phreakmods website but couldn't find it.
3. PS360+'s on TE's. So everything works fine. However when I hook up the PS360+ to the TE's turbo panel for home button functionality the home button gets pressed while in-game. It does it pretty randomly too. The home button works as it should when pressed.
1. I have a Qanba Q2 (PS3 Version) which suddenly doesn't work. When I plug in the USB, the lights faintly flicker (so faint, you can't see the original blue colour, but can tell it turned on), turn off completely and then nothing happens. The stick also doesn't respond to any button presses and when plugged into the PC, the stick isn't shown on the control panel (not even as unknown device). So I attempt to replace the USB cable by exchanging it with the Q4 I have...and still the same problem. I take out my multimeter to see if there's power on the stick. Sure enough there's power. I try unplugging all the LEDs and still nothing. Anyone know what's wrong?
2. A friend's TE Round 1 automatically presses down when I plug it into the PS3. So I open it up and disconnect the JLF. Still occurs. I take a test meter and check the voltage between the VCC and Down and sure enough the voltage is lower than on the other directions. How do I fix this? I heard it has to do with a resistor being installed. I recall seeing it somewhere on Phreakmods website but couldn't find it.
3. PS360+'s on TE's. So everything works fine. However when I hook up the PS360+ to the TE's turbo panel for home button functionality the home button gets pressed while in-game. It does it pretty randomly too. The home button works as it should when pressed.