Hi everyone,
Just got myself a Wii U stick for cheap and a PS360+. Took it apart last night and saw that the home and turbo button pcb is the whole thing just like the PS3 version. Turned it around though and solder points are different. I don't care about keeping Wii U functionality so I cut the usb cable and turned it around and this is what I got:
![IMG_20140527_220254.jpg]()
So correct me if I am wrong but I just need to do the following?
1. Trace out the home and turbo buttons with a multi-meter to one of those circular solder points on the back of the PCB and connect with 360+.
2. Connect the VCC cable on the usb cable of the Wii PCB to the same on the 360+?
3. Ground the 360+ to the original PCB which in turn is ground to the sanwa joystick.
Do I have this all right?
Just got myself a Wii U stick for cheap and a PS360+. Took it apart last night and saw that the home and turbo button pcb is the whole thing just like the PS3 version. Turned it around though and solder points are different. I don't care about keeping Wii U functionality so I cut the usb cable and turned it around and this is what I got:
So correct me if I am wrong but I just need to do the following?
1. Trace out the home and turbo buttons with a multi-meter to one of those circular solder points on the back of the PCB and connect with 360+.
2. Connect the VCC cable on the usb cable of the Wii PCB to the same on the 360+?
3. Ground the 360+ to the original PCB which in turn is ground to the sanwa joystick.
Do I have this all right?