Quantcast
Channel: Tech Talk — shoryuken
Viewing all articles
Browse latest Browse all 8072

Building my own "stickless arcade" thingy (like a hitbox, not being one)

$
0
0
Hello,

For those who'd like to build their own "stickless arcade" stick/pad/hitbox (whatever you call it) like me, it could be great to have a full list of parts to buy, and an explanation of why.

I'm kind of a noob here, so my goal is double:
* make sure I've the complete list of parts in my order...
* make sure another ppl who'd like to do the same as me has already a well defined list.

Amount of buttons:
* 8 buttons for the commands (24mm) -> Why? According to hitbox, it's easier to use than the traditional 30mm
* 3 buttons for the U/L/R directions (24mm) -> Why? Because it's the purpose of the stickless!
* 2 buttons for home/start + select (24mm) -> Why? You still have to press start/select.
* 1 larger button for the Down (30mm) -> Why? Larger button for thumb
While you could reduce the number of buttons for commands, or adapt the size of them according to your wants/needs, this is considered as a "reference" of what I read in different forums.

Model of the buttons:
* You should stick with the same type of buttons
* It completely depends on the your preferences
* You should have easy to press buttons

I will personnaly stick with Sanwa OBSF buttons (instead of Gamerfinger Cherry MX or Sanwa RG). It's louder, but nobody complains about it.

Buttons total:
13 OBSF-24 + 1 OBSF-30 ().

Wiring:
* 1 "daisy chaining" cables for common ground like this one -> Why? It seems easier to wire 1 longer "daisy chaining" cables with the same ground and chop down the excess cable, rather than having 2 large daisy chaining cable all accross your box or pluggin 14 grounds cables...
* 14 cables for data input
* 14 Sanwa AT-110 (for easy connection) & 14 SR-110 (for protection)
* A crimping tool
* A screwdriver/soldering iron to connect the data input into your PCB

Uplink to console:
You do whatever you want there. It's most likely part of the PCB. The most elegant are the Neutrik plugs. If you are looking for multi-console, then go for RJ45. If it's only for standard consoles, go for USB.

The box:
That's where stickless shines: you can do whatever you want, you don't need a large box! Go for plexi/MDF/metal/whatever. I haven't read a recommendation of what to NOT use.

PCB:
This could be a thread on its own. While there are lots of possible PCBs, only a few of them mention supporting SOCD. This is what you need to play with a "stickless arcade" thing. I'll try to list them in the future.

Other:
No idea. Anyone?

List of other topics on the matter:
http://forums.shoryuken.com/discussion/122799/hit-box-we-so-s-tier1
http://forums.shoryuken.com/discussion/140307/the-stickless-arcade-stick-thread


Viewing all articles
Browse latest Browse all 8072

Trending Articles