Specifically on a JLF. I put my original JLF my HRAP EX in a friend's stick while I used some different Seimitsu stick to experiment. I have a new JLF and because the HRAP PCB isn't common ground, I can't use the pcb mounted switches. I'm using plain non mounted switches I got from akihabarashop MS-O-3R ( http://www.akihabarashop.jp/images/sanwa-MSY3.jpg ).
The problem is, the engage distance is MUCH greater than with the pcb mounted switches. Should it be like this? I figured they were the same switches just one has quick disconnect capabilities. This issue makes quarter circles a problem, as it usually goes from down to right/left without hitting a diagonal. I tested it slowly listening for the clicks and the diagonals definitely hit fine with the pcb with the switches in. Is this normal and is there any way to fix this without soldering? (I dont have the tools to do so atm)
The problem is, the engage distance is MUCH greater than with the pcb mounted switches. Should it be like this? I figured they were the same switches just one has quick disconnect capabilities. This issue makes quarter circles a problem, as it usually goes from down to right/left without hitting a diagonal. I tested it slowly listening for the clicks and the diagonals definitely hit fine with the pcb with the switches in. Is this normal and is there any way to fix this without soldering? (I dont have the tools to do so atm)